Removing The Front Cover - Star Micronics LC24-20 User Manual

I
. .
e.. .
. .
.
Removing the front cover
Open the front cover by 1 ifting up the back cover using the two grips on
either
side. then remove the cover by pulling up (see Figure 2-4).
-.
FlgUre Z-4. (Jpen the hont cover, and remove It by pulllng up
NOTE: You can keep the front cover installed on the printer, as shown in
Figure 2-5. But, in this case you must take care not to injure your
fingers with the tear assist edge.
Tear assist cdsze
Front
Figure
2-5. The front cover can stay on the printer
13