Star Micronics LC24-20 User Manual page 118

Print quadruple-density 8-bit graphics
IMode I ASCII
I Decimal
I Hexadecimal I
Both
<ESC> "Z" n1 1'/2
27 90 ~~1/~2
1B 5A n/
/72
ml
m2
ml t?12 .,. ml
m2
Prints bit-image graphics at 240 dots per inch horizontally (maxi-
'mum 1920 dots wide), skipping every second dot in the horizontal
direction. See <ESC> "K" for other information.
Print hex-density 24-bit graphics
IModel ASCII
I Decimal
I Hexadecimal \
Ll
Std.
<FS>
-z" Ill
n2
28 90 /!/ n2
IC 5A nl n2
ml
m2 nd n71
m2
nd m / nr2 nd .,,
Prints 24-bit dot graphics at 360 dots per inch horizontally. The
graphics image is 24 dots high and nf + n2
x
256 dots wide. Maxi-
mum width is 8 inches (2880 dots). In the data ml, n72,m3 ... each
three bytes represent 24 vertical dots. In the leftmost position, the
most significant bit of ml is the top dot; the least significant bit of
ml is the eighth dot from the top; the most significant bit of m2 is the
ninth dot; the least significant bit of m2 is the sixteenth dot from the
top; the most significant bit of rn3is the seventeenth dot from the top;
the least significant bit of
n~3is
the bottom dot. The rest of data is
similar. The number of data bytes must be 3 x (nl + n2 x 256). Dots
beyond the right margin are ignored. At the end of dot graphics
printing, the printer returns automatically to character mode.
110