Star Micronics LC24-20 User Manual page 54

LCD Message — Meanings and action
Displuysin the EDS mode. Indicates the current status of
the displayed EDS hank and switch number.
Press the 1
EJECTPARK I
button to change the status.
Quiet mode is selected.
Press the I
PAPER FEEDI button while in the on line
mode
to return to the Normal mode.
Front panel setting are saved in the printer's memory as
a "MACRO".
Short print test mode is selected.
Long print test mode is selected.
Turn off the power switch to cancel the long print test
mode.
Print area test mode is selected.
Hexadecimal dump mode is selected.
Turn off the power switch to cancel the hexadecimal
dump mode.
Top of form is set manually with the control panel.
Buffer is cleared manually with the control panel.
Paper is not loaded to the printer.
DOIAdjustment mode is selected.
Bail lever is closed before the paper goes through the
location of the bail lever. Open the bail lever.
Release lever is moved while the paper is in printing
position.
The memory of EDS settings is accessed.
Print head error. Turn off the printer and turn it on again.
Carriage home position error. Turn off the printer and
turn it on again.
Paper handling error. Turn off the printer and turn it on
again.
S.W.I. error. Turn off the printer and turn it on again.
RAM check error. Turn off the printer and turn it on
again.
Watch dog error. Turn off the printer and turn it on again.
46