Star Micronics LC24-20 User Manual page 97

Enable printing of all character codes
Mode ASCII Decimal Hexadecimal
Std.
43> '1"
nl n2
28 92
nl n2
IC
5C nl n2
IBM
<ESC> '1"
nl n2 27 92 nl n2
10 5C
nl n2
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered
control codes. This command remains in effect for the next
id +
n2
x 256 characters, where nl and n2 are numbers between Oand 255.
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
Enable printing of all character codes on next character
Mode ASCII Decimal Hexadecimal
Std. <FS>
"~. >
n
28 94
n
IC 5E
n
IBM <ESC> "A"
n 27 94 n
IB 5E
n
This command operates like <ESC> '1" except that it remains in
effect for only one character.
Select slash zero
Mode ASCII Decimal Hexadecimal
Std. <ESC> "-" <1>
27 126 1 IB 7E 01
Causes subsequent zero characters to be overprinted with a slash (B).
Select normal zero
Mode
ASCII
Decimal Hexadecimal
Std.
<ESC> "-"
<O> 27 126 0
IB 7E 00
Causes
subsequent zero characters to be printed normally (0),
without a slash.
89