Table of Contents
Advertisement
Printer does not feed paper
Probable Cause I Action
Paperisjamming.
Bailleveris closed
before paper goes
throughthe baille-
ver location.
Adjustment lever
is set incorrectly.
Fanfold form is
parked.
Remove all forms and pieces of paper.
Open the bail lever. Bail lever automatically closed when
the paper goes through the bail lever location.
Check the setting of the adjustment lever. See "Adjusting
the printing gap" in Chapter 3.
Move bail lever forward to unpark the fanfold paper.
Line spacing is incorrect or overprinting occurs
Probable Cause
The tractor posi-
tions are incor-
rectly adjusted.
Incorrect emula-
tion is selected.
Problem with the
application
pr6gram.
Platen knob was
manually turned
while the Power
indicator was on.
Forms are jam-
ming between
printing surface
and the print
head.
Action
Adjust the tractor positions. See "Loading fanfold forms"
in Chapter 3.
Select the other emulation with the EDS setting. See
Chapter 5.
Refer to your application program manual.
Set the top of form. See "Top of form" in Chapter 4.
Do not manually turn the platen knob when the power is
on. Use the [
PAPER FEEDI
button.
Reset adjustment lever. See "Adjusting the printing gap"
in Chapter 3.
59
Advertisement
Table of Contents
