Table of Contents
Advertisement
I
11.Turn on the power using the switch located at the front of the printer. The
printer will beep, indicating that the paper is not yet fully loaded. A "PE>'
message will also flash on the LCD display to confirm this.
Mute cover
Figure 3-8. Close the rear cover and the mute cover, then set the paper
guide horizontally
12.Now pull the bail lever toward the front of the printer. The paper will be
fed and adjusted past the print head to a position ready for printing.
er
Figure 3-9.
Pull the bail lever toward the front of the printer to load paper.
NOTE: Do not return the bail lever backward. The bail lever automatically
returns to its original position after the paper goes through under the
bail lever location.
13. If you want to set the paper to a different position, set the printer off-line
by pressing the !
ON
LINE J
button, then set the paper by using the
micro-feed function. (For details, refer to Chapter 4.)
25
Advertisement
Table of Contents
