Front Cover Unit - Star Micronics AsuraCPRNT Technical Manual

4
B
R o u te t h e c a b l e
between the circuit
board chassis and
the case.
3
1
2
– 8 –
7 . Front Cover Unit
Required jigs and tools: Electric screwdriver (Driver bit 2)
(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Remove the each cover and the front panel to the pro-
cedure described in item 1.
(3) Remove the board cover unit to the procedure de-
scribed in item 2.
(4) Removal
• Two connectors 1
• Screw 2
[ Tightening torque : 0.8±0.2 N . m]
(5) Push the open lever 3 toward yourself to open the fornt
cover unit 4 .
(6) Spread to the outside at B points (left/right) of front
cover unit 4 .
[ Caution in assembly ]
• Unlock the cover if it is locked.
Lever