Star Micronics LC24-20 User Manual page 107

Perform one n/180-inch, n/216-inch, or n/360-inch line feed
Mode
ASCII Decimal Hexadecimal
Both
<ESC> 'J.. ~
27 74 n
IB 4A n
Feeds the paper once by
n/180
inches,n/216 inches, or
n/360
inches,
according to the defined base unit. The value of n is between 1 and
255. Does not move the print position right or left in the standard
mode. Does not change the line-spacing setting.
Perform one nl180-inch reverse line feed
Mode
ASCII Decimal Hexadecimal
Std.
<ESC> "j"
17
27 106 }7
IB 6A n
Feeds the paper once by n/180 inches in the reverse direction, where
n is
between 1 and 255.
Does not move the print position right or left. Does not change the
line-spacing setting.
Feed paper n lines
Mode
ASCII Decimal Hexadecimal
Std.
<ESC> '1"' <1> }7
27 102 1 )/ 1B 66 01 )?
Feeds the paper
n
lines from the current line, where
n is
between O
and 127.
Set top of page at current position
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> "4" 27 52
IB 34
Sets the current position as the top-of-page position. Note that this
can also be done from the control panel.
99