Graphics Commands - Star Micronics LC24-20 User Manual

GRAPHICS COMMANDS
Print normal-density 8-bit graphics
Mode ASCII Decimal Hexadecimal
Both
<ESC> "K'" nl
)12
27 75 n]
n2
IB 4B /?/ )72
t??]
t?12
ml tn2 ,..
ml
n?2 .,,
Prints bit-image graphics at 60 dots per inch horizontally. The
graphic image is 8 dots high and n] + t12x 256 dots wide. Maximum
width is 8 inches (480 dots). ml, n?2 , ...
are the dot data, each a 1-byte
value from O to 255 representing 8 vertical dots, with the most
significant bit at the top and the least significant bit at the bottom.
The number of data bytes must be }?1+ n2
x
256. Dots beyond the
right margin are ignored. At the end of bit-image printing the printer
returns automatically to character mode.
Print double-density 8-bit graphics
Mode
ASCII
Decimal Hexadecimal
Both
<ESC> "L"
tt[
n2
2? 76 nl
n2
IB 4C nl d
m [
t?12 rnl tn2 ,.. tnl tn2 ,..
Prints bit-image graphics at 120 dots per inch horizontally (maxi-
mum 960 dots wide). See <ESC> "K" for other information.
Print double-density, double-speed 8-bit graphics
IMode I ASCII
I Decimal
I
Hexadecimal
I
Both
<ESC> "Y" tt[ }12 27 89 n! )2
IB 59 /// n2
ml rn2 .,, m [
tt12 n71 nt2
Prints bit-image graphics at 120 dots per inch horizontally (maxi-
mum 960 dots wide), skipping every second dot in the horizontal
direction. See <ESC> "K" for other information.
109