Table of Contents
Advertisement
LOADING SINGLE SHEETS
This section will take you through the procedures for loading single sheets
of paper.
The paper path for cut forms is shown in Figure 3-11.
Figure 3-11.
Paper path for cut forms.
If you are using the optional Automatic Sheet Feeder, refer to Chapter 7.
Raise the paper guide in position on the rear cover of the printer.
:
lever
Figure 3-12.
Raise the paper guide for single sheets.
2. Adjust the paper guides to match the size of the paper you will be using.
Remember that printing will start some distance from the left-hand edge
of the carriage.
28
Advertisement
Table of Contents
