Table of Contents
Advertisement
Characters are wrong or missing; formatting control codes do not work
Probable Cause I Action
Problem with the
application
program.
Some wires are
missing from the
print head.
Wrong default
setting with
EDS switches.
Refer to your application program manual.
Printer needs repair.
Check the current EDS setting. Modify the EDS setting.
s Dots are missing or print quality is poor
Probable Cause I Action
Adjustment lever Check the position of the adjustment lever.
is set incorrectly. See Chapter 3.
Print head is not
Printer needs repair,
working.
c Forms are smudged or printing is too dark
Probable Cause I Action
Adjustment l ever
is set incorrectly.
Ribbonis twisted
or is not between
theprinthead and
the print head
shield.
Print head shield
(or print head) is
damaged
or
missing.
Check the position of the adjustment lever.
Move the lever to a lighter setting (front). See Chapter 3.
Install the ribbon correctly. See "Installing the ribbon
cartridge" in Chapter 2.
See "Installing the ribbon cartridge" in Chapter 2 to
locate the print head shield and print head, Contact your
dealer,
61
Advertisement
Table of Contents
