Table of Contents
Advertisement
NOTE: Set the front cover aside carefully after they have been removed
from the printer. Reverse the procedure described above when
removing the Automatic Sheet Feeder.
1
I
Figure
7-6. Insert the stacker attachment.
Loading paper
1. If fanfold paper has already been loaded in the printer, park the paper
through the rear slot.
2. Push the printer release lever toward the rear of the printer (~) to load
single sheets.
3. Pull the paper loading lever toward the front of the printer to pull the
hopper out until it is in position.
loading lever
Figure 7-7. Pull the paper loading lever torward.
68
Advertisement
Table of Contents
