Star Micronics LC24-20 User Manual page 106

Execute &SC> "A"
Mode ASCII Decimal Hexadecimal
IBM <ESC> "2" 27 50
IB 32
Sets the line spacing to the value defined by the last preceding
<ESC> "A" command. Sets the line spacing to 1/6inch if there is no
preceding <ESC> "A" command.
Line feed
Mode ASCII Decimal Hexadecimal
Both
<LF> 10 OA
Prints the current line and feeds the paper to the next line. See the
preceding commands for the line spacing.
Reverse linefeed
Mode ASCII Decimal Hexadecimal
Std. <ESC> <LF> 27
10 IB OA
IBM
1
<ESC> " " 27 93
IB 5D
Prints the current line and feeds the paper in the reverse direction to
the preceding line. See the preceding commands for the line spacing.
Select forward feed mode
Mode Ascll Decimal Hexadecimal
Std.
<FS>
"F"
28 70 IC 46
Cancels the reverse feed mode and selects forward feed mode. This
is the default setting at power-on.
Select reverse feed mode
Mode I ASCII \ Decimal I Hexadecimal I
Std. <FS> "R" 28 82 ]
IC
52
Selects reverse feed mode. Reverses the direction of all vertical
movements. Ignored when friction feed or bottom feed is used.
98