Startup Application - Bosch Rexroth VCH 08.1 Manual

DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
9.2.2

StartUp Application

Fig.9-2: Key assignment of the start-up dialog
After having connected the IndraControl VCH 08.1 to the power supply and
started the operating system, the "StartUp application" is called.
Fig.9-3: StartUp Application
In this dialog the system settings can be started by selecting "Service" button
or the customer application can be started by selecting "Run". The cursor keys
can be used for the selection. If you should not have finished the selection within
five seconds, the customer application starts automatically.
Bosch Rexroth AG 93/117
Software