Areas Of Use And Application - Bosch Rexroth VCH 08.1 Manual

DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
2.4.2

Areas of Use and Application

Important Instructions on Use, Target Group and Purpose of the Document
Rexroth disclaims as manufacturer any warranty, liability or dam‐
ages occurring due to inappropriate use of the products. Further‐
more, Bosch Rexroth is not paying any compensation; the user is
responsible for any risks resulting from inappropriate use of the
products.
Before using Bosch Rexroth products, the following requirements must be met
to ensure appropriate use of the products:
● Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
● Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
● Damaged or faulty products must not be implemented or put into opera‐
tion.
● It must be ensured that the products are installed as specified in the doc‐
umentation.
The IndraControl VCH 08.1 Hand-held Terminal is a PC-based operating and
visualization device that can also fulfill control functionalities, depending on the
application or configuration.
NOTICE
The IndraControl VCH 08.1 Hand-held Terminal may exclusively be used with
the accessories and add-on components specified in this documentation. Com‐
ponents not named expressly mentioned must neither be mounted nor con‐
nected. The same applies to cables and conduits.
The products may only be operated with the expressly stated configurations
and component combinations as well as with the software and firmware which
is given and specified in the respective functional description.
The IndraControl VCH 08.1 Hand-held Terminal was developed for control
tasks.
Typical areas of application of the Hand-held Terminal IndraControl VCH
08.1 are:
● Handling systems and assembly systems
● Packaging and food processing machines
● Printing machines and paper processing machines
● Machine tools
The devices of the IndraControl VCH 08.1 design may only be operated under
the assembly conditions and installation conditions, in the specified position of
application and under the specified ambient conditions (temperature, degree
of protection, humidity, EMC etc.) given in this documentation.
Bosch Rexroth AG
Danger of destruction of the device if not ex‐
pressly stated accessories, add-on compo‐
nents and other components, cables, conduits,
software and firmware is used.
13/117