Appropriate Use; Introduction - Bosch Rexroth VCH 08.1 Manual

12/117 Bosch Rexroth AG
Important Instructions on Use, Target Group and Purpose of the Document
2.4

Appropriate Use

2.4.1

Introduction

Target group
Project engineer
Start-up technician
Service technician
Fig.2-1: Target group, prerequisites
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
WARNING
The products are designed for the use in an industrial environment and may
therefore only be used for the intended purpose. If they are not used as inten‐
ded, situations causing personal injury as well as material damage can occur.
DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
Prerequisite knowledge and ability
Technical basic education (advanced
technical education, engineering degree
or corresponding professional experi‐
ence),
Knowledge about:
● the method of operation of a PLC
● safety regulations
● the application
Technical basic education (advanced
technical education, engineering degree
or corresponding professional experi‐
ence),
Knowledge about:
● safety regulations
● the method of operation of the ma‐
chine or system
● fundamental functions of the appli‐
cation
● system analysis and troubleshooting
● the setting options at the operating
devices
Technical basic education (advanced
technical education, engineering degree
or corresponding professional experi‐
ence),
Knowledge about:
● the method of operation of a PLC
● safety regulations
● the method of operation of the ma‐
chine or system
● Diagnostic Configurations
● systematic error analysis and trou‐
bleshooting
Physical injury and material damage might re‐
sult from an inappropriate use of the products!