Housing; Foil Keyboard; Front Panel Of The Indracontrol Vch 08.1; Connection To The Control - Bosch Rexroth VCH 08.1 Manual

6/117 Bosch Rexroth AG
System Presentation
1.3

Housing

1.4

Foil Keyboard

1.5

Front Panel of the IndraControl VCH 08.1

1.6

Connection to the Control

The vibration and shock resistant housing consists of low-inflammable material
(UL 94-V0). The housing is resistant to impact, water, detergents (alcohol and
tensides), oil, cutting oil (drilling oil), grease, and lubricants. The double panel
and extremely robust housing was tested on free fall onto industrial floor (height
1.5 m).
The keypad consists of a chemical resistant polyester foil with embossed keys.
① Installation point for override potentiometer
② Installation point for electronic handwheel
③ Emergency stop button, 2-circuit, or stop button
④ Foil Keyboard
⑤ Display
Fig.1-2: Front view of the IndraControl VCH 08.1
The IndraControl VCH 08.1 hand-held terminal is connected to the control via
a connection module in front panel mounting. At the front side a 17-pin female
connector allows the comfortable connection of a IndraControl VCH 08.1. All
clamps for fix wiring to the control are located on the rear side of the connection
module in the control cabinet.
Depending on the used safety component on the IndraControl VCH 08.1, two
different connection modules (see the following table) are available.
DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal