Table of Contents
Advertisement
DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal
2
Important Instructions on Use
2.1
Intended Use
2.1.1
Introduction
2.1.2
Areas of Use and Application
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
WARNING
The products are designed for the use in an industrial environment and may
therefore only be used for the intended purpose. If they are not used as inten‐
ded, situations causing personal injury as well as material damage can occur.
Rexroth disclaims as manufacturer any warranty, liability or dam‐
ages occurring due to inappropriate use of the products. Further‐
more, Rexroth is not paying any compensation. The user is
responsible for any risks resulting from inappropriate use of the
products.
Before using Rexroth products, the following requirements must be met to en‐
sure appropriate use of the products:
●
Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on intended use.
●
Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
●
Damaged or faulty products must not be implemented or put into opera‐
tion.
●
It must be ensured that the products are installed as specified in the doc‐
umentation.
The Embedded Terminals IndraControl VEP **.4 are PC based machine oper‐
ator terminals. Depending on the respective configuration they can also perform
control functions.
To control and monitor the IndraControl VEP **.4, it can be necessary to con‐
nect additional sensors and actuators.
Bosch Rexroth AG
Important Instructions on Use
Physical injury and material damage might re‐
sult from an inappropriate use of the products!
11/139
Hide quick links:
Advertisement
Table of Contents
