Table of Contents
Advertisement
2-2
Important Directions for Use
Areas of Use and Application
2.2
Inappropriate Use
The VAK 11.2 and the VAK 41.2 are keypads, that are used in
conjunction with the visualization units of Bosch Rexroth. The two
keypads are designed for use in the following cases:
•
to operate graphical user interfaces,
•
to navigate within graphical user interfaces.
Note:
The VAK 11.2 and the VAK 41.2 may only be used with the
accessories and parts specified in this document. If a
component has not been specifically named, then it may not
be either mounted or connected. The same applies to cables
and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
Typical areas of application of the VAK 11.2 and the VAK 41.2 are:
•
Handling and assembly systems
•
Packaging and foodstuff machines
•
Printing and paper processing machines
•
Machine tools
The VAK 11.2 and the VAK 41.2 may only be operated under the
assembly, installation and ambient conditions as described here
(temperature, system of protection, humidity, EMC requirements, etc.)
and in the position specified.
Using the keypads VAK 11.2 and VAK 41.2 outside of the above-
referenced areas of application or under operating conditions other than
described in the document and the technical data specified is defined as
"inappropriate use".
The keypads may not be used, if
•
they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extreme maximum temperatures or if
•
Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safety
Instructions!
VAK 11.2 / VAK 41.2
DOK-SUPPL*-VAK*11/41**-PR02-EN-P
Advertisement
Table of Contents
