Bosch Rexroth VCH 08.1 Manual page 34

32/117 Bosch Rexroth AG
Technical Data
Examination of the conformity re‐
garding the directive on machinery
Examination of the conformity re‐
garding the EMC directive
Other standards
Standard
EN ISO 13850:2006
EN ISO 13849-1:2008
EN 60204-1:2006 (chapter 9, chapter 10) Safety of machinery - Electrical equipment
Fig.4-15: Examination of the conformity regarding the directive of machinery
Standard
EN 61131-2:2003 (chapter 8, chapter 9)
So the accordance to following standards
is also given:
EN 61000-6-2:2001
EN 61000-6-4:2001
Fig.4-16: Examination of the conformity regarding the EMC directive
For the design of the safety concept some parts of the following legally not
bounded European standards has been used:
General procedure and safety principles
Standard
EN ISO 12100-1:2003
EN ISO 12100-2:2003
Fig.4-17: General procedure and safety principles
Enabling button
Standard
EN ISO 13849-1:2008
EN 60204-1:2006
ISO 10218-1:2006
Fig.4-18: Enabling button
DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
Meaning
Safety of machinery - emergency stop -
principles for design
Safety of machinery – safety-related parts
of control systems - part 1: General prin‐
ciples for design
of machines - part 1: General require‐
ments
Meaning
Programmable logic controllers
- part 2: Equipment requirements and tests
EMC generic standards - noise immunity
for industrial environments
EMC generic standards - emission stand‐
ard for industrial environments
Meaning
Safety of machinery - basic concepts, gen‐
eral priciples for design - part 1: Basic
terminology, methodology
Safety of machinery - basic concepts, gen‐
eral priciples for design - part 2: Technical
principles
Meaning
Safety of machinery – safety-related parts
of control systems - part 1: General prin‐
ciples for design
Safety of machinery - electrical equipment
of machines - part 1: General require‐
ments
Manipulating Industrial Robots - Safety