Bosch Rexroth VCH 08.1 Manual page 89

DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
Priority of the network settings from
the IndraControl VAC 30.2/31.1
connection module
Fig.7-26: Dialog box "StartUp Applikation": Dialog for creating and internally stor‐
ing network settings
If this dialog is confirmed by "Yes" and the subsequent saving of the internal
file was successful, the following message is displayed:
Fig.7-27: Dialog box "StartUp Applikation - Check PM": Confirmation that network
settings have been saved
Confirm the message 7-27
The device will subsequently restart with the settings determined in "Rexroth
settings". Check "Rexroth settings" after successful registration of the internal
file.
If on switching on the IndraControl VCH 08.1 an IndraControl VAC 30.2/31.1
with memory function is recognized and the data for network configuration has
been successfully read, this configuration always has priority.
Bosch Rexroth AG
Pin Assignments of the IndraControl VCH 08.1
with the "Apply data" key.
87/117