Star Dot Impact Printer Specifications page 73

ESC w 1
[Name] Specify two-byte 16 x 16 dot Kanji characters [Single Density] (Default)
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Cancels specify Japanese character expansion, and sets to two-byte 16 x 16 dot Kanji characters [single
density]
Kanji characters become two-pass characters ( to state (A))
When the power is turned off, this is set.
See "Relationship of Kanji Character Size Selection."
ESC w 0
[Name] Specify double high & wide Kanji characters
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Sets double high & wide (double-wide/double-high) 16 x 16 Kanji characters. (to state (D))
See "Relationship of Kanji Character Size Selection."
STAR Command Specifications
ESC w 1 Or ESC
1B 77 01
27 119 1
ESC w 0 Or ESC
1B 77 00
27 119 0
w "1"
1B 77 31
27 119 49
w "0"
1B 77 30
27 119 48
3-65
Rev. 0.70