Color Printing Command Details - Star Dot Impact Printer Specifications

3-6

2-Color Printing Command Details

ESC RS C n
[Name] Select/cancel 2-color printing mode
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] 0 ≤ n ≤ 1
48 ≤ n ≤ 49 ("0" ≤ n ≤ "1")
[Initial Value] DIP switch
[Function]
n Select/cancel 2-color printing mode
0, 48 Cancel 2-color printing mode
When in two-color print mode, this command cancels 2-color printing mode.
This command is ignored when the 2-color print mode is already cancelled.
The specification of this command is not cleared by ESC @ CAN.
The following processes are executed by canceling the 2-color print mode using this command.
• Prints data in line buffer in 2-color print mode, if unprinted data exists in the line buffer.
• Waits to stop printing when printing in 2-color print mode.
1, 49 Select 2-color printing mode
This command selects 2-color print mode, when in single color print mode.
This command is ignored already in the 2-color print mode.
The specification of this command is not cleared by ESC @ CAN.
The following processes are executed by selecting the 2-color print mode using this command.
• Prints data in line buffer in the single-color print mode, if unprinted data exists in the line buffer.
• Waits to stop printing when printing in single-color print mode.
• Initializes print color setting (2-color print mode setting)
STAR Command Specifications
ESC RS C n
1B 1E 43 n
27 30 67 n
3-80
Rev. 0.70