Star Dot Impact Printer Specifications page 17

ESC W n
[Name] Specify/cancel expanded double-wide printing
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] n = 0, 1, 48, 49
[Initial Value] n = 0 (Horizontal double-wide printing cancelled)
[Function] Specifies/cancels horizontal double-wide printing for ANK characters and Kanji characters, according to an n
value.
n Function
0, 48 Cancel double wide printing
1, 49 Specify double-wide expanded printing
ESC h n
[Name] Specify/cancel expanded double-tall printing
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] n = 0, 1, 48, 49
[Initial Value] n = 0 (vertical double-tall printing cancelled)
[Function] Specifies/cancels vertical double-tall printing for ANK characters, according to an n value.
n Function
0, 48 Cancel printing double high expanded character height
1, 49 Specify double-tall expanded printing
Double high & wide expanded character printing is possible by combining the double-wide and double-tall expanded
character commands.
The line feed amount including the expanded double-tall characters is twice the normal amount.However, in standard
specifications, only the line feed amount is doubled for font configurations of 6 x 12 IBM block graphic characters.
When double-tall expanded characters and normal printing are mixed in the same line, they are aligned at the bottom.
Double-tall expanded is effective only for ANK characters, and not effective for Kanji characters.
STAR Command Specifications
ESC W n
1B 57 n
27 87 n
ESC h n
1B 68 n
27 104 n
3-9
Rev. 0.70