Star Dot Impact Printer Specifications page 8

Class Commands
Others RS
CAN
DC3
DC1
ESC @
ESC U
ESC GS #
ESC #
ESC ? LF NUL
Note 1
• Japanese character control commands are ignored on models not installed with Japa-
nese character fonts.
• All Japanese character control commands are ignored if the specification for the location
of use is specified as SBCS (single byte countries) by the memory switch.
• Black Mark Related Commands
Class Commands
Black mark
ESC d (Note 2)
FF
Related
ESC FF
commands
ESC GS ( F
ESC RS m
Note 2
tion is enabled by the memory switch.
• USB Related Commands
Class Commands
USB
Related com-
mands
• 2-Color Printing Related Commands
Class Commands
2-Color Printing ESC RS C
Related ESC 4
Commands ESC 5
STAR Command Specifications
Name
Ring buzzer
Cancel print data and initialize commands
Printer deselect
Select printer
Command initialization
Select printing direction
Set memory switch
Set memory switch
Reset printer and execute self print
Kanji characters
Name
Paper cut instruction
(Note 2) Performs TOF operation
Set top of form amount after detecting black mark
Set top of form amount in black mark control
Enable, disable black mark detection
These are commands whose operation specifications vary when the black mark func-
Name
Name
Select/cancel 2-color printing mode
Specify red printing
Specify black printing
2-3
Rev. 0.70