Page Control Commands - Star Dot Impact Printer Specifications

3-3-5

Page Control Commands

FF
[Name] Form feed
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] ---
[Function] This command performs the following operations after the printer prints the printing data in the line buffer.
Operations are set by the memory switch.
Memory SW Cutter Model
Condition (1) Executes a form feed
Condition (2) Feeds paper to the cutting position and performs a full cut. (*1)
Condition (3) Executes a form feed.
Condition (4) Feeds paper to the cutting position and performs a partial cut. (*1)
(*1) Paper feed to cutting position:
(*2) Paper feed to tear-bar position:
See each printer's product specifications manual for details on the memory switch settings.
STAR Command Specifications
FF
0C
12
Executes a 1 inch paper feed.
Executes a 7/6 inch paper feed.
Tear Bar Model
Executes a form feed.
Paper is fed to the tear-bar position. (*2)
Executes a form feed.
Paper is fed to the tear-bar position. (*2)
3-23
Rev. 0.70