BEL
[Name]
External device 1 drive instruction
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
---
[Initial Value]
---
[Function]
Executes the external device drive conditions set according to the ESC BEL (external device drive pulse
width setting command).
As with other commands, this command temporarily stores data in the data buffer, then executes in the order
received.
Note External device 1 and external device 2 cannot be executed simultaneously.
FS
[Name]
External device 1 drive instruction (real time)
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
---
[Initial Value]
---
[Function]
Executes the external device drive conditions set according to the ESC BEL (external device drive pulse
width setting command).
The printer executes this command immediately upon reception.
Note External device 1 and external device 2 cannot be executed simultaneously.
STAR Command Specifications
BEL
07
7
FS
1C
28
3-50
Rev. 0.70