Star Dot Impact Printer Specifications page 32

ESC C n
[Name] Set page length to n lines
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] 1 ≤ n ≤ 255
[Initial Value] 1/6 inch x 42
[Function] This command sets the length of one page to [currently set line feed amount x n] lines
The current position is the top position of the page.
The page length set using this command is unaffected by changing the form feed amount later.
Moving to the top of the page is performed using the FF (form feed) command.
If a page length is set less than the bottom margin setting value that is currently set, the page length setting
value is valid and the bottom margin setting value is cleared.
ESC C NUL n
[Name] Set page length to n inches
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] 1 ≤ n ≤ 127
[Initial Value] n = 7
[Function] This command sets the length of one page to n inches.The current position is the top position of the page.
The page length set using this command is unaffected by changing the form feed amount later.
Moving to the top of the page is performed using the FF (form feed) command.
If a page length is set less than the bottom margin setting value that is currently set, the page length setting
value is valid and the bottom margin setting value is cleared.
STAR Command Specifications
ESC C n
1B 43 n
27 67 n
ESC C NUL n
1B 43 00 n
27 67 0 n
3-24
Rev. 0.70