Star Dot Impact Printer Specifications page 19

ESC – n
[Name] Specify/cancel underling mode
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] n = 0, 1, 48, 49
[Initial Value] n = 0 (Underline cancelled)
[Function] Specifies underline according to the value of n.
n Function
0, 48 Cancels underline
1, 49 Specifies underline
Underlines are applied to the 9
Underlines are not applied to horizontal tabs and to specified horizontal direction positions.
When double-wide expanded characters have been specified, the underline is also expanded, but if double-tall expand-
ed characters have been selected, the underline does not expand in the vertical direction. It remains a one-dot line.
This command is enabled for ANK characters and Kanji characters and is ineffective for block graphic characters.
ESC n
[Name] Specify/cancel upperline
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] n = 0, 1, 48, 49
[Initial Value] n = 0 (Upperline cancelled)
[Function] Specifies upperline according to the value of n.
n Function
0, 48 Cancels upperline
1, 49 Specifies upperline
Upperlines are applied to the 1st dot of the character.
Upperlines are not applied to horizontal tabs and to specified horizontal direction positions.
When double-wide expanded characters have been specified, the upperline is also expanded, but if double-tall expand-
ed characters have been selected, the upperline does not expand in the vertical direction. It remains a one-dot line.
This command is enabled for ANK characters and Kanji characters and is ineffective for block graphic characters.
STAR Command Specifications
ESC - n
1B 2D n
27 45 n
dot of the character.
th
ESC _ n
1B 5F n
27 95 n
3-11
Rev. 0.70