Star Dot Impact Printer Specifications page 23

SI
[Name] Select upside-down printing
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Upside-down printing cancelled
[Function] Specifies upside-down printing
This command is enabled only when at the top of the line.Therefore, upside down and right-side up
characters cannot both exist in the same line.
This command is enabled for following.
• ANK characters
• Kanji characters
• Bit images
DC2
[Name] Cancel upside-down printing
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Upside-down printing cancelled
[Function] Cancels upside-down printing
This command is enabled only when at the top of the line.
STAR Command Specifications
SI
0F
15
DC2
12
18
3-15
Rev. 0.70