Star Dot Impact Printer Specifications page 60

ESC GS EM DC1 m n1 n2
[Name] Set external buzzer drive pulse condition
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] 1 ≤ m ≤ 2
0 ≤ n1 ≤ 255
0 ≤ n2 ≤ 255
[Initial Value] n1 = 0, n2 = 0
[Function] Set external buzzer drive pulse condition.
m specifies the buzzer drive terminal that sets the condition.
m Buzzer Drive Terminals
1, 49 Buzzer drive terminal 1
2, 50 Buzzer drive terminal 2
n1 specifies the energizing time; n2 specifies the delay time.
• Energizing time
• Delay time
Drive Pulse
Print Operation
The drive of the external buzzer set by this command is performed by <ESC> <GS> <EM> <DC2> m n1 n2.
The set value is not initialized by <ESC> "@", or <CAN>.
STAR Command Specifications
ESC GS EM DC1
1B 1D 19 11
27 29 25 17
49 ≤ m ≤ 50
= 20 msec x n1
= 20 msec x n2
ON
OFF
20 x n1 (msec)
(Energize Time)
m n1 n2
m n1 n2
m n1 n2
20 x n2 (msec)
(Delay Time)
Prohibit Printing, Paper Feed
3-52
Rev. 0.70