Download - Star Dot Impact Printer Specifications

3-3-7

Download

ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1
[Name] Register download characters (vertical 1 byte font)
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] 33 ≤ n1 ≤ n2 ≤ 127 (21h ≤ n1 ≤ n2 ≤ 7Fh) 33 33
m = 0, 128 (00h, 80h)
0 0 ≤ d1 to d7 ≤ 255
[Initial Value] ---
[Function] Registers download characters to the specified character code.
A maximum of 10 download characters can be registered for 7 x 9 and 5 x 9 fonts.
The range of the location to write download characters is specified by n1 and n2. When the registered
character is 1 character, n1 = n2.
If one has been already registered to an address, it is overwritten.
This command registers download characters independent to each font.
m indicates the relationship of the character pattern and the print head (see figure below).
Definition data (d1 to d7) set the bits that correspond to the dots to print to "1," and the bits that correspond to
the dots that are not printed to "0."
Even if ESC @ (command initialization) is executed, the registered download character is not cleared.
This command is effective only a font other than the Thai font is selected as the character code table.
(Composed of vertical 1 byte except for the Thai font.)
Relationship of character pattern data and print head.
1. When m = 0 (00h):
Pin Used
1
2
3
4
5
6
7
8
9
2. When m = 128 (80h):
Pin Used
1
2
3
4
5
6
7
8
9
Note • When registering 7 x 9 fonts, dots adjacent in the horizontal direction do not print.
• When character rotation is specified, 7 x 9 font registered characters cannot be printed. 5
x 9 font characters are always printed.
STAR Command Specifications
ESC & NUL n1 n2
1B 26 00 n1 n2
27 38 0 n1 n2
Upper
D8 D7 D6 D5 D4 D3 D2 D1
Unused
Upper
D8 D7 D6 D5 D4 D3 D2 D1
Unused
[m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1
[m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1
[m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1
Lower
Lower
3-33
Rev. 0.70