Line Spacing - Star Dot Impact Printer Specifications

3-3-4

Line Spacing

LF
[Name] Line feed
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Set line feed to 1/6 inch
[Function] After printing data in the line buffer, paper is fed according to the currently set line feed amount.
CR
[Name] Carriage return (Print line feed)
[Code] ASCII CR
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Set line feed to 1/6 inch
[Function] Specifies the function according to the memory switch value.
Memory SW Function
Condition (1) Ignored
Condition (2) Same as the <LF> code.
Condition (3) Executes only printing, with no paper feed.
See each printer's product specifications manual for details on the memory switch settings.
STAR Command Specifications
LF
0A
10
0D
13
3-17
Rev. 0.70