Star Dot Impact Printer Specifications page 71

ESC u 1
[Name] Specify 16 x 16 dot [single density] Kanji characters.
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Specify 16 x 16 dot [single density] Kanji characters.
When two-bytes is selected, they become two-pass characters (state (B) to state (A))Dots continuous
horizontally are thinned for printing.
This command sets to the double-tall expanded character mode by combining with ESC x 0 (Specify
expanded Kanji characters) (state (B) → state (C))
See "Relationship of Kanji Character Size Selection."
ESC u 0
[Name] Specify 16 x 16 dot [Double Density] Kanji characters
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Specify 16 x 16 dot [double density] Kanji characters.
When two-bytes is selected, they become four-pass characters (state (A) to state (B))Dots continuous
horizontally are printing.
This command sets to the 4 x expanded character mode by combining with ESC x 0 (Specify expanded Kanji
characters) (state (A) → state (D))
See "Relationship of Kanji Character Size Selection."
STAR Command Specifications
ESC u 1 Or ESC
1B 75 01
27 117 1
ESC u 0 Or ESC
1B 75 00
27 117 0
u "1"
1B 75 31
27 117 149
u "0"
1B 75 30
27 117 148
3-63
Rev. 0.70