Line Mode - Star TSP400 SERIES User Manual

3-2. Line Mode

Commands to Select Characters
Control codes
<ESC> "R" n
<ESC> "/" "1"
<ESC> "/" <1>
<ESC> "/" "0"
<ESC> "/" <0>
<ESC> "b" n1 n2 n3 n4 1B 62 n1 n2 n3 n4
d1 ... <RS>
<ESC> "M"
<ESC> "p"
<ESC> "P"
<ESC> ":"
<ESC> <SP> n
<SO>
<DC4>
<ESC> "W" n
<ESC> <SO>
<ESC> <DC4>
<ESC> "h" n
<ESC> "i" n1 n2
<ESC> " – " "1"
<ESC> " – " <1>
<ESC>" – " "0"
<ESC> " – " <0>
<ESC> " _ " "1"
<ESC> " _ " <1>
<ESC> " _ " "0"
<ESC> " _ " <0>
Hexadecimal
Function
codes
1B 52 n Select international character set
1B 2F 31
Select slash zero
1B 2F 01
1B 2F 30
Select normal zero
1B 2F 00
Select bar code printing
d1 ... 1E
1B 4D Select 12-dot pitch printing
1B 70 Select 14-dot pitch printing
1B 50 Select 15-dot pitch printing
1B 3A Select 16-dot pitch printing
1B 20 n Set character spacing
0E Sets the printing magnified double in
character width.
14 Resets the printing magnified in
character width.
1B 57 n Sets the magnification rate in character width.
1B 0E Sets the printing magnified double in
character height.
1B 14 Resets the printing magnified in character
height.
1B 68 n Sets the magnification rate in character height.
1B 69 n1 n2 Sets the magnification rates in character
width and height.
1B 2D 31
Select underlining
1B 2D 01
1B 2D 30
Cancel underlining
1B 2D 00
1B 5F 31
Select overlining
1B 5F 01
1B 5F 30
Cancel overlining
1B 5F 00
– 8 –