Brother ADS-2600W Quick Setup Manual

Hide thumbs Also See for ADS-2600W:

Advertisement

Quick Setup Guide
Start Here
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
WARNING
1
Unpack the machine
WARNING
• Plastic bags are used in the packing of your machine. To avoid danger of suffocation, keep these
plastic bags away from babies and children. Plastic bags are not toys.
• Only use the power cord supplied with this product.
a
Remove the protective tape and film covering the machine and the LCD.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
ADS-2600W
CEE-ENG Version 0
1

Advertisement

Table of Contents
loading

Summary of Contents for Brother ADS-2600W

  • Page 1 Quick Setup Guide Start Here ADS-2600W Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup Guide for the correct setup and installation. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death WARNING or serious injuries.
  • Page 2: Connect The Power Cord

    Pull the Output Tray out of the machine a and Connect the power cord then unfold the Document Stopper b. Important DO NOT connect the USB cable yet. Connect the power cord. WARNING The machine must be fitted with an earthed plug.
  • Page 3: Set The Date And Time

    Set the date and time Automatic Daylight Savings Time The machine displays the date and time. You can set the machine to change automatically for daylight savings time. It will reset itself forward one hour in the spring and backward one hour in the fall. Press Swipe up or down, or press a or b to display Press...
  • Page 4: Set The Time Zone

    Set the Time Zone You can set the time zone (not summer time but standard time) on the machine for your location. Press Swipe up or down, or press a or b to display Initial Setup. Press Initial Setup. Press Date & Time. Press Time Zone.
  • Page 5: Choose Your Connection Type

    If your computer does not have a DVD-ROM drive you can download the latest drivers, manuals and utilities for your model from the Brother Solutions Center at http://solutions.brother.com/. Some software applications included on the DVD-ROM may not be available as a download.
  • Page 6: Before You Install

    Follow the you want and click OK. on-screen instructions. • When the Brother Product Research & Support Program starts up, follow the Choose Local Connection (USB), and then on-screen instructions.
  • Page 7 Please wait for the software to install. After the Important installation, the Brother software will search for the Brother device. This will take a few • DO NOT connect the machine to a USB port on moments to complete. a keyboard or a USB hub.
  • Page 8: Wired Network

    IP Address and Node Name will be displayed to help you identify the machine. The installation of the Brother drivers will automatically start. The installation screens appear one after another. When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions.
  • Page 9 The following screens will appear. • When the Software Update Setting screen appears, choose the software update setting you want and click OK. • When the Brother Product Research & Support Program starts up, follow the on-screen instructions. Note Internet access is required for the software update and the Brother Product Research &...
  • Page 10 Please wait for the software to install. After the installation, the Brother software will search for the Brother device. This will take a few moments to complete. If the machine is configured for your network, choose your machine from the list, and then click Next.
  • Page 11: For Wireless Network Users

    For Wireless Network Users For wireless network interface users Before you begin Although your Brother machine can be used in both a wired and wireless network, only one of the connection methods can be used at a time. Note If you have previously configured the wireless settings of the machine you must reset the network settings before you can configure the wireless settings again.
  • Page 12 For Wireless Network Users SSID (Network Name) / Network Key Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings. Item Record the current wireless network settings...
  • Page 13 For Wireless Network Users Setup using the Temporarily connect the USB cable directly to the computer and the machine. installation DVD-ROM If the confirmation screen appears, check the and a USB cable box and click Next, go to g. ® Otherwise, go to h.
  • Page 14 For Wireless Network Users Enter the Network Key you wrote down in step 9-a on page 11, and then click Next. Note If your network is not configured for Authentication and Encryption, the following screen will appear. To continue configuration, click OK and go to j.
  • Page 15 For Wireless Network Users Manual setup from the Press Yes to connect your machine using WPS. (If you choose No (Manual) to control panel using the continue manual configuration, go to d to enter Setup Wizard (Macintosh, a Network Key.) mobile devices and When the LCD shows Start WPS, press the ®...
  • Page 16 To download the User’s Guide for the application you are using, please go to the manuals download section on your model’s home page on the Brother Solutions Center at http://solutions.brother.com/.
  • Page 17: Wireless Network

    ® ® (Windows XP Home/XP Professional/Windows Vista /Windows The installation of the Brother drivers will Before you install automatically start. The installation screens appear one after another. When the On-Line Registration screen is displayed, make your selection and follow the Make sure that your computer and machine are on on-screen instructions.
  • Page 18 If your wireless settings fail, the Wireless Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration. The installation of the Brother drivers will automatically start. Please wait for the software to install. The installation of MFL-Pro Suite is now complete.
  • Page 19 Install Optional Applications ® Windows Install optional applications You can install the following applications. Nuance PDF Converter Professional 7 Enter the Nuance serial number that is shown on the sleeve of the MFL-Pro Suite DVD-ROM package when installing Nuance PDF Converter Professional 7.
  • Page 20: How To Scan To A Computer

    How to scan to a computer Note Scanning a document • You can change Scan to PC settings, such as the saved file format, using ControlCenter. For details, see the User’s Guide on the DVD-ROM. There are various scanning methods (see Scanning Methods in the User’s Guide).
  • Page 21: Entering Text For Wireless Settings

    For Wireless Network Users Reset the network settings to factory default To restore all network settings of the internal Scan server to factory default, please follow the steps below. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).
  • Page 22 The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

Table of Contents