Brother ADS-3000N Service Manual page 65

(3) Remove the taptite bind B M3x8 screw, and remove the drive earth plate from the machine.
Drive earth plate
Taptite bind B M3x8
(4) Remove the three taptite cup B M3x10 screws to remove the FG harness (GR) and main
PCB upper/lower shield from the machine.
Main PCB upper/lower shield
HARNESS ROUTING: Refer to
Fig. 3-13
Taptite cup B M3x10
Fig. 3-14
"1. Main PCB ASSY".
3-21
FG harness (GR)
Confidential