9.12 Document scanning position sensor PCB
(1) Remove the guide film from the front cover ASSY.
Assembling Note:
• Guide film should not be reused as its double-sided tape looses the adhesive force
once it is removed. Replace it with a new one.
(2) Remove the two screw cup M3x6 screws. Remove the FG spring and reverse roller holder
support from the front cover ASSY. Remove the two springs.
FG spring
Reverse roller
holder support
Front cover ASSY
Screw cup M3x6
Fig. 3-33
3-35
Guide film
Springs
Confidential