Brother ADS-3000N Service Manual page 77

(3) Remove the flat cable support film from the front cover ASSY.
Assembling Note:
• Flat cable support film should not be reused as its double-sided tape looses the
adhesive force once it is removed. Replace it with a new one.
(4) Remove the second side CIS flat cable from the front cover ASSY.
Double-sided tapes
HARNESS ROUTING: Refer to
Assembling Note:
• When securing the flat cable support film with the double-sided tapes, attach the tape
on the position shown in the figure above.
• When connecting the second side CIS flat cable, fold it as shown in the figure below.
Mountain fold
Valley fold
31 45
45
Main PCB
side
66
Flat cable support film
Fig. 3-30
"4. Panel
Second side CIS flat cable
°
Insulation tape area
354
Fig. 3-31
3-33
unit".
130
° °
45 45
Second side
CIS flat cable
Front cover ASSY
83
CIS side
92
93
156
157
Confidential