Connect A Wireless Client To Your Router; Wps Button - D-Link DIR-821 User Manual

Ac1200 wi-fi router

Hide thumbs Also See for DIR-821:

Table of Contents

Section 5 - Connecting to a Wireless Network

Connect a Wireless Client to your Router

The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most

wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS

button (or a software utility with WPS) that you can press to connect to the DIR-821 router. Please refer to your user manual for

the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps

below:

Step 1 - Press the WPS button on the DIR-821 for about 1 second. The Internet LED on the front will start to blink.

Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS

process).

Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be

connected and your wireless connection will be secure with WPA2.

D-Link DIR-821 User Manual

Table of Contents