Transferring Files To The Optional User C-Card; Loading A File; Deleting A File From The User C-Card; Changing The User C-Card - Standard Horizon CP500 Owner's Manual

11.0.1 Transferring files to the optional User C-CARD

1. Remove a C-MAP NT
into the slot.
2. Press [MENU] twice. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]. A screen will
appear.
4. Move the ShuttlePoint knob to highlight SAVE and press [ENT].
5. A popup SAVE FILE window appears. In this window you can change the Name and the
file Type by using the ShuttlePoint knob.
6. To save the file, move the ShuttlePoint knob to SAVE in window and press [ENT].
7. A Information pop window will momentarily be shown "SAVING" then show SAVING
OK.
8. Press [ENT] to confirm.

11.0.2 Loading a file

If you have a problem and accidentally loose the User Points in the GPS Chart Plotter with
the optional User C-CARD it is possible to load the data back into the GPS Chart Plotter
using the following procedure:
1. Press [MENU] twice. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]. A screen will
appear.
3. Select the file from the User C-CARD list by using the ShuttlePoint knob and press [ENT].
4. Move the ShuttlePoint knob to highlight LOAD and press [ENT].
5. A "LOADING" message will momentarily be shown then a pop up Information window
show "LOADING...OK".
6. Press [ENT] to confirm.

11.0.3 Deleting a file from the User C-CARD

You may want to delete a saved file on the User C-CARD.
1. Press [MENU] twice. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]. A screen will
appear.
3. Select the file from the User C-CARD list by using the ShuttlePoint knob and press [ENT].
4. Move the ShuttlePoint knob to highlight DELETE and press [ENT].
5. A popup Warning window will to confirm you want to delete the file. Select YES and
press [ENT] to confirm (select NO otherwise).
6. Press [ENT] to confirm.

11.0.4 Changing the User C-CARD

You may want to change the User C-CARD inserted in the slot with a new one.
1. Press [MENU] twice. Move the ShuttlePoint knob to highlight USER POINTS and press [ENT].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]. A screen will
appear.
3. Open the door. Change the User C-CARD into the same slot or insert a new one into
the other slot.
4. Move the ShuttlePoint knob to highlight CHANGE and press [ENT] to confirm.
Page 60
+
/MAX C-CARD if present and insert the optional User C-CARD
CP500