Optical Safety - Raycus RFL-C Series User Manual

Figure 1 shows safety labels and their locations. These include warning labels, apertures through
which laser radiation is emitted and labels of certification and identification, etc. Specifications
of these labels are as follows:
1.Aperture Label
4. CE Compliance
6.Laser Radiation Hazard

1.4 Optical Safety

Any dust on the end of the collimator assembly can burn the lens and damage the laser.
Table 1: Specifications of Safety Labels
2.Class 4 Laser Product
5. Identification Plate
7.Electrical Hazard
CAUTION: If the output of the device is delivered through a lens with
an anti-reflection coating, make sure that the lens is of good quality and
clean.
Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide 100W~750W Ver: 1.0
3
3.Class 2M Laser Product
Label for Guide Laser