Related Manuals for Raycus RFL-C020H-CE
Summary of Contents for Raycus RFL-C020H-CE
- Page 1 Continuous-Wave Fiber Laser User Guide RFL-C020H-CE/C025H-CE 武汉锐科光纤激光技术股份有限公司 Wuhan Raycus Fiber Laser Technologies Co., Ltd.
-
Page 2: Table Of Contents
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE TABLE OF CONTENTS 1 Safety Information ........................3 1.1 Symbols Used in this User Guide ..................3 1.2 Laser Classification ......................3 1.3 Safety Labels ........................3 1.4 Optical Safety ........................5 1.5 Electrical Safety ........................ -
Page 3: Safety Information
Using Guide of RFL-C020H-CE/C025H-CE 1 Safety Information Thank you for choosing Raycus fiber laser. This User Guide provides important safety, operation, warranty and other information. Please read it carefully before you use this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly. - Page 4 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure 1 Safety Label Locations These safety labels include warning labels, apertures through which laser radiation is emitted and labels of certification and identification, etc. Specifications of these labels are as follows:...
-
Page 5: Optical Safety
There are no operator serviceable parts inside, and all maintenance must be performed in Raycus or by qualified Raycus personnel. Do not try to remove covers, or electrical shock may be caused, and warranty will be void. -
Page 6: Product Description
Check all items against the list and contact Raycus immediately if there is any missing item or evident damage to the unit. DO NOT attempt to install or operate the laser, if there is any evident or suspected damage to the unit. -
Page 7: Operation Environment
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE CAUTION: The fiber optic cable and output head is precise optic instrument, any vibration or impact to the output head, and twist or excessive bend to the cable will damage the instrument. -
Page 8: Precautions For Use
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Table 3 The Constant Dew Point Table AMBIENT DEW POINT Maximum Relative humidity Room Temperature(℃) -3.5 14.5 16.5 10.5 16.5 10.5 18.5 21.5 19.5 28.5 27.5 33.5 Laser operating temperature range ... -
Page 9: Specifications
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE 2.6 Specifications Table 4 Specifications Items Conditions RFL-C020H-CE RFL-C025H-CE Unit Notes Optical Specifications Operation Modes CW/Modulated Cooling water Nominal Output Power 1500± 50 2000± 50 temperature 22±1℃ Power Adjust Range... -
Page 10: Installation
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE 3 Installation 3.1 Dimensions Figure 2 shows the external dimensions of the shows dimensions of RFL-C020H-CE/RFL- C025H-CE. Figure2 (a) Front panel view (unit: mm) Figure2 (b) Rear panel view (unit: mm) -
Page 11: Output Head And Installation
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure2 (c) Top panel view (unit: mm) 3.2 Output Head and Installation Figure 3 Dimensions of IQB Output Head (unit : mm) The IQB laser output head of are all the standard IQB interface. The specific appearance and... -
Page 12: Cooling Requirements
Inspect the output lens before installing the output head to the processing head. Clean the output lens if necessary. It is strictly prohibited to disassemble the output head by personnel not approved by Raycus, or the warranty is void. 3.3 Cooling Requirements Table 5 Cooling Requirements 型号... -
Page 13: Installation Procedure
Insert the water pipes into the inlet and outlet. e) Check the output head and clean it if necessary. This procedure must be performed by personnel of Raycus or authorized by Raycus. Make sure the environment is clean, or the output cable may be contaminated. - Page 14 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE g) During the installation and disassembly process, please take care to handle the laser output head gently, avoiding any shock. h) In the installation of laser output cable and output head process, please make sure that the surrounding environment is clean, otherwise it may pollute the output head (do not use fans, which actually may bring more dust).
-
Page 15: Using The Product
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE 4 Using the Product 4.1 Power Connection Table 6 Power Connection Requirements Model RFL-C020H-CE/RFL-C025H-CE Supply Source 220V± 10% AC 50/60Hz Power Cord The laser comes with a 1.5-meter power cord One End of Power Cord Three wires labeled +、－、PE... -
Page 16: Laser Intelligent Connection System App Operation Instructions
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE 4.4 Laser intelligent connection system APP operation instructions 4.4.1 Log in After opening the Laser intelligent connection system APP, the account and password login page are displayed, as shown in Figure 4: Figure 4 Log in interface 4.4.2 Connect... - Page 17 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure 5 Verification code login page Turn on the Bluetooth switch of the single-mode laser APP. If there is a Bluetooth device nearby, ensure that the Bluetooth is set Switch on the standby, click the "Search" button on the connection page.
- Page 18 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Click "Connect" on the right of the searched Bluetooth device to enter the state of connection, as shown in Figure 7 sign: Figure 7 Connecting 4.4.3 Equipment After successful connection, the laser device-status interface is displayed, as shown in Figure 8:...
- Page 19 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure 8 Device - Status The device status page mainly has the main power supply, equipment, alarm, light status display, and light. The state display of percentage, light output power, laser temperature, as well as the state display of emergency stop, REM, laser enable, red light, as well as the specific state of the laser and some parameter values.
- Page 20 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure 9 /10 Device – Alarm (No alarm content & Specific title) The status display of the laser also has the function of supporting the setting of some parameters,...
- Page 21 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure 11 Devices – Settings 4.4.4 Mine Entering Mine–About us, you can see function introduction, version update, and about machines, as shown in Figure 12:...
- Page 22 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Figure 12 Mine – About us The APP version information interface displays the current version information and upgraded version of the laser. As shown in Figure 13: Figure 13 Mine - About us – App version...
- Page 23 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE Mine - About the machine page shows the relevant information of the laser, such as laser time, laser model, laser serial number, main control serial number, key version number, system information.
- Page 24 Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE 4.4.5 Software introduction The Laser intelligent connection system APP is a mobile software that can be connected to the laser through Bluetooth to facilitate the after-sales, maintenance, and commissioning engineers, etc., without portable notebooks, you can use the single -mode laser app installed on Android phones to and the laser.
-
Page 25: Common Alarm And Handling Measures
Wuhan Raycus Fiber Laser Technologies Co., Ltd. Using Guide of RFL-C020H-CE/C025H-CE 5 Common alarm and handling measures 5.1 Alarms Display Connect Bluetooth, after the laser and the client software to establish normal communication. All alarm states of the laser can be displayed on the software interface, as shown in Figure 16.When the internal temperature of the laser is abnormal, Alarms are generated when the output power, scattered light, or power supply is abnormal. - Page 26 If there is no red guide light, please stop using the laser immediately and contact Raycus. If the red guide light output normally, please restart the laser to try, if the alarm continues to occur, please contact Raycus.
-
Page 27: Warranty, Return And Maintenance
The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. -
Page 28: End-Of-Life Disposal
All the items about warranty and service above provided by Raycus are for user’s reference; formal contents about warranty and service are subject to the contract.
Need help?
Do you have a question about the RFL-C020H-CE and is the answer not in the manual?
Questions and answers