Table of Contents
Advertisement
AS-i CC-Link Gateway
Electrical connection
7.4
CC-Link interface
Signal color
DA
1
DB
2
DG
3
SLD
4
FG
5
The CC-Link interface connector is designed as a 5-pin COMBICON connector. It
is located on the left hand side of the front panel (see section <Overview of termi-
nals, indicators and operating elements>).
Information!
For better noise performance, SLD (cable shield) should be grounded separately in
10 cm distance to the COMBICON connector.
7.5
Chip card
The configuration is stored in a fixed installed EEPROM and can be overwritten
by the chip card. The chip card does not have to be inserted in operation.
Warning!
Power must always be turned off when removing or inserting the chip card!
blau/ blue/ bleu/ blu/ azul
weiss/ white/ blanc/ bianco/ blanco
gelb/ yellow/ jaune/ giallo/ amarillo
n/a
n/a
17
Advertisement
Table of Contents
