Connection Cable To The Cc-Link Interface; Connection Cable To The Ethercat Interface - Pepperl+Fuchs IDENTControl IC-KP2 Series Quick Start Manual

IC-KP2-*
Product Description
2.2.5

Connection cable to the CC-Link interface

The IDENTControl Compact has two M12 connectors. It is connected to the bus
via standard CC-Link cable with M12 connectors. If you want to exchange the
control unit without affecting the bus during operation (hot-plug capability),
connect the control unit via a Y-cable to CC-Link IN.
Figure 2.5
Accessories
Terminator
Y-cable
Socket M12, field attachable
Cable connector M12, field attachable
2.2.6

Connection cable to the EtherCAT interface

The IDENTControl Compact has a D-coded M12 socket and is connected to the
network with a suitable cable.
Figure 2.6
Accessories
Connection cable 5 m
8
Model number
ICZ-TR-V1-110R
ICZ-TR-V1-130R
ICZ-3T-0.2M-PVC-CCL-V1-G
V1S-G-ABG-PG9
V1-G-ABG-PG9
Model number
V1SD-G-5M-PUR-ABG-V45-G