AS-i CC-Link Gateway
Electrical connection
7.6.1.1
CC-Link status LED (green/red) flashing sample
C-Control mode (C-Control active)
CC-Link LED
flashing green
flashing green/red
green
flashing green/red
Standard mode (C-Control inactive)
CC-Link LED
off
red
green
red
7.6.2
Buttons
The buttons are used for the following:
Mode/
Switching between configuration mode and protected operating mode, and saving
the current AS-i configuration as the nominal configuration.
Set
Selecting the address of and assigning an address to a slave.
OK, ESC
Changing to the advanced display mode.
For additional information see section <Operation in advanced display mode>.
CC-Link Error
off
on or flashing
off
on or flashing
CC-Link Error
off
on or flashing
off
on or flashing
CC-Link Run
off
off
on
on
CC-Link Run
off
off
on
on
Tab. 7-2.
Tab. 7-3.
19