Disposal; Ce Declaration - Proxxon FET Manual

6. Pull off the old toothed belt 3 and fit the new toothed belt.
Turn the drive at the toothed belt pulleies slightly back and
forth until the new toothed belt sits correctly.
7. Replace the thrust washer 2 and tighten with the Phillips
screw 1.
8. Close the upper housing part and correct the saw blade
tilt as desired.
9. Make sure to remove the Allen key for blocking the shaft
before commissioning.

14. Disposal

Please do not dispose of the device in the household waste!
The device contains valuable substances that can be recy-
cled. For any further questions, please contact your munici-
pal disposal company or other appropriate municipal institu-
tions.
20
15. EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product
conforms to the following directives and normative
documents:
EU EMC Directive 2004/108/EC
EU Machinery Directive 2006/42/EC
Date: 11.02.2016
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.
Fine cut circular saw FET
27070
DIN EN 55014-1 / 02.2010
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 06.2009
DIN EN 61029-1 / 01.2010
DIN EN 61029-2-1 / 09.2010
DIN EN ISO 14121-1 / 09.2010