Use the device only when you have understood it exactly and always adhere to the instructions. PROXXON is not liable for the safe functioning of the device in cases 2 General view (fig. 1) • handling that does not conform to the usual usage, 1.
Only choose saw blades suitable for the material to be cut. separating head) Width: approx. 300 mm (saw head at far right) 6 Working with the KGS 80 Crosscut and mitre saw Jaw length of vice: 80 mm Span width: max. 45 mm 6.1 Cutting capacity...
13 is released!) 2. Release stop lever 4 by lifting it and guide turntable 1 to the cor- The KGS 80 crosscut and mitre saw is supplied with an adjustable responding position. Let go of stop lever 4. Caution! The turntable length stop 1.
6-10, Härebierg Please note: L-6868 Wecker Replacement saw blades and a corundum cutting disc for the ma- KGS 80 chine can be obtained on the market. Product designation: 27160 Article No.: Please see our device catalogue or consult your nearest dealer!
Page 8
Spare Parts List PROXXON KGS 80 ET - Nr.: Description ET - Nr.: Description...
Page 10
Service note All PROXXON products are thoroughly inspected after production. Should a defect occur nevertheless, please contact the dealer from whom you purchased the product. Only the dealer is responsible for handling all legal warranty claims which refer exclusively to material and manufacturer error.