Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Proxxon FET
Summary of Contents for Proxxon FET
- Page 1 Kreissäge FET Manual...
- Page 2 Fig. 2 Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 5a Fig. 6 - 4 -...
- Page 3 Fig. 7 Fig. 8a Fig. 9 Fig. 8b Fig. 10b Fig. 10a Fig. 10c Fig. 10d - 5 -...
- Page 4 Fig. 12 Fig. 11 Fig. 13a Fig. 13b Fig. 13c Fig. 13d Fig. 14 - 6 -...
- Page 5 Fig. 16a Fig. 15 Fig. 16b Fig. 17 - 88 -...
-
Page 6: Table Of Contents
Only operate this device with exact knowledge of it and com- ply with the instructions. 6.2. Swinging open the upper housing part 6.3. Fastening the saw PROXXON will not be liable for the safe function of the 6.4. Saw blade guard device for: 6.4.1. Secure the saw blade guard with the splitting wedge •... -
Page 7: Description Of Machine
3. Description of machine 4. Legend (fig. 1) The FET table saw is a well thought-out machine for all 1. Saw blade guard occurring sawing tasks in the range of small and fine applica- 2. Saw table tions. 3. Saw blade A powerful motor, solid mechanics, high-quality materials and 4. -
Page 8: Swinging Open The Upper Housing Part
2. The saw blade position can now be set using the smaller Your FET is equipped with a saw blade guard. It is designed knurled button 2: Turning clockwise will adjust the blade... -
Page 9: Adjusting The Saw Blade Tilt
10. Working with the limit stops 7.2. Adjusting the saw blade tilt The saw blade can be tilted to manufacture mitre cuts. The 10.1. Working with the longitudinal stop desired value is set, or read, with the help of the angle scale. Longitudinal stops are indispensable working aids for produc- Caution! ing any number of work pieces with exactly the same width... -
Page 10: Adjusting The Limit Stop Scale (Zero Position)
Caution! Appropriate use of the auxiliary stop is made to be able to Your FET may not be used for slitting (notch completed in the easily cut somewhat larger work pieces as well. For this, the work piece)! To groove or notch, please by all means use the saw table must be extended first, as described in the chapter Proxxon groove-milling device (article number 28736). -
Page 11: General Tips On Sawing
• If necessary, use the included push-rod to feed the work work piece material, saw job intensity and the desired quality piece. of the result must be considered. Proxxon has 4 different saw blades that can be used to operate the machine: 12. Changing the saw blade Your saw is equipped with a carbide-tipped saw blade with 24 teeth and an 80 mm diameter ex works. -
Page 12: Maintenance And Repairs
Only have repairs carried out by qualified specialist person- „Unpacking“) nel or, even better, by the PROXXON central service. Never 3. Vacuum the inside of the device with a vacuum cleaner repair electrical parts, but always exchange them for original 4. -
Page 13: Disposal
1. 8. Close the upper housing part and correct the saw blade tilt Device designation: Fine cut circular saw FET as desired. 9. Make sure to remove the Allen key for blocking the shaft We declare that the designated products comply with the before commissioning. - Page 14 Notizen...
Need help?
Do you have a question about the FET and is the answer not in the manual?
Questions and answers