Siemens SIMATIC ET 200SP HA System Manual page 95

Connecting conductors
Follow these steps
Conductor Solid
(type)
Mounting Without ferrule
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Removing a wire
Using the screwdriver, press the spring release as far as it will go and pull out the wire.
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD
With ferrule or ultrasonic compression
- Compress or crimp the cable with ferrules
-
Insert the wire into the push-in terminal as far as it will go.
-
Push the wired connector plug into the socket in the interface module.
6.7 Connecting the power supply to the interface module
Multi-core (stranded wire)
Strip 8 to 10 mm of the wires.
Without ferrule, unprocessed
-
Press the screwdriver into the
spring release.
Pull the screwdriver out of the
spring release.
Wiring
95